s07b, s07d, s07g, s07j, s07m document number 85733 rev. 2.0, 20-aug-10 vishay semiconductors www.vishay.com 1 for technical questions with in your region, please c ontact one of the following: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com small signal switching diode, high voltage features ? for surface mounted applications ? low profile package ? ideal for automated placement ? glass passivated ? high temperature soldering: 260 c/10 s at terminals ? wave and reflow solderable ? aec-q101 qualified ? compliant to rohs directive 2002/95/ec and in accordance to weee 2002/96/ec mechanical data case: do-219ab (smf) polarity: band denotes cathode end weight: approx. 15 mg packaging codes/options: gs18/10k per 13" reel (8 mm tape) gs08/3k per 7" reel (8 mm tape) parts table 17249 part ordering code marking remarks s07b s07b-gs18 or s07b-gs08 sb tape and reel s07d s07d-gs18 or s07d-gs08 sd tape and reel s07g s07g-gs18 or s07g-gs08 sg tape and reel s07j s07j-gs18 or s07j-gs08 sj tape and reel s07m s07m-gs18 or s07m-gs08 sm tape and reel
www.vishay.com 2 document number 85733 rev. 2.0, 20-aug-10 s07b, s07d, s07g, s07j, s07m vishay semiconductors for technical questions with in your region, please c ontact one of the following: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com absolute maximum ratings t amb = 25 c, unless otherwise specified note: 1) averaged over any 20 ms period thermal characteristics t amb = 25 c, unless otherwise specified note: 1) mounted on epoxy substrate with 3 mm x 3 mm cu pads ( 40 mm thick) electrical characteristics t amb = 25 c, unless otherwise specified note: 1) pulse test: 300 pulse width, 1 % duty cycle parameter test condition part symbol value unit maximum repetitive peak reverse voltage s07b v rrm 100 v s07d v rrm 200 v s07g v rrm 400 v s07j v rrm 600 v s07m v rrm 1000 v maximum rms voltage s07b v rms 70 v s07d v rms 140 v s07g v rms 280 v s07j v rms 420 v s07m v rms 700 v maximum dc blocking voltage s07b v dc 100 v s07d v dc 200 v s07g v dc 400 v s07j v dc 600 v s07m v dc 1000 v maximum average forward rectified current t tp = 75 c 1) i f(av) 1.5 a t a = 65 c 1) i f(av) 0.7 a peak forward surge current 8.3 ms single half sine-wave t l = 25 c i fsm 25 a parameter test condition symbol value unit thermal resistance junction to ambient air 1) r thja 180 k/w operating junction and storage temperature range t j , t stg - 55 to + 150 c parameter test condition symbol min. ty p. max. unit maximum instantaneous forward voltage 1 a 1) v f 1.1 v maximum dc reverse current at rated dc blocking voltage t a = 25 c i r 10 a t a = 125 c i r 50 a reverse recovery time i f = 0.5 a, i r = 1 a, i rr = 0.25 a t rr 1.8 s typical capacitance at 4 v, mhz c j 4pf
s07b, s07d, s07g, s07j, s07m document number 85733 rev. 2.0, 20-aug-10 vishay semiconductors www.vishay.com 3 for technical questions with in your region, please c ontact one of the following: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com typical characteristics t amb = 25 c, unless otherwise specified figure 1. forward current derating curve figure 2. typical instantaneous forward characteristics 0 0.6 0. 8 1.2 1.0 0204060 8 0 100 120 140 160 a v erage for w ard c u rrent (a) am b ient temperat u re (c) 0.4 0.2 resisti v e or ind u cti v e load 3.0 mm x 3.0 mm 40 m thick copper pad areas 17375 100 1000 600 700 8 00 900 1000 1100 instantaneo u sfor w ard c u rrent (ma) instantaneo u sfor w ard v oltage (m v ) t j = 150 c t j =25 c t j = 100 c 17376 figure 3. typical instantaneous reverse characteristics figure 4. capacitance vs. reverse voltage instantaneo u sre v erse c u rrent ( a) instantaneo u sre v erse v oltage ( v ) 0 100 200 300 400 500 600 700 8 00 900 0.01 0.1 10 1 100 t j = 150 c t j = 125 c t j = 100 c t j = 75 c t j = 50 c t j = 25 c 17377 v r ( v ) c(pf) 0 5 10 15 20 25 30 35 40 10 9 8 7 6 5 4 3 2 1 0 1737 8
www.vishay.com 4 document number 85733 rev. 2.0, 20-aug-10 s07b, s07d, s07g, s07j, s07m vishay semiconductors for technical questions with in your region, please c ontact one of the following: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com package dimensions in millimeters (inches): do-219ab (smf) foot print re commendation: re v . 3 - date: 13. march 2007 doc u ment no.:s 8 - v -3915.01-001 (4) 1.3 (0.051) 1.3 (0.051) 2.9 (0.114) 1.4 (0.055) 2.9 (0.114) 2.7 (0.106) 3.9 (0.154) 3.5 (0.13 8 ) 0. 8 5 (0.033) 0.35 (0.014) 1.2 (0.047) 0. 8 (0.031) 1.9 (0.075) 1.7 (0.067) 1.0 8 (0.043) 0. 88 (0.035) 0.25 (0.010) 0.05 (0.002) 0.1 (0.004) 0 (0.000) 5 5 created - date: 15. fe b r u ary 2005 17247 detail z enlarged
s07b, s07d, s07g, s07j, s07m document number 85733 rev. 2.0, 20-aug-10 vishay semiconductors www.vishay.com 5 for technical questions with in your region, please c ontact one of the following: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com blistertape dimens ions for smf in millimeters 1 8 513 ps doc u ment- n o.: s 8 - v -3717.02-001 (3)
legal disclaimer notice www.vishay.com vishay revision: 12-mar-12 1 document number: 91000 disclaimer all product, product specifications and data are subject to change without notice to improve reliability, function or design or otherwise. vishay intertechnology, inc., its affiliates, agents, and employee s, and all persons acting on it s or their behalf (collectivel y, vishay), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any o ther disclosure relating to any product. vishay makes no warranty, repres entation or guarantee regarding the suitabilit y of the products for any particular purpose or the continuing production of any product. to the maximum extent permitted by applicable law, vi shay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation specia l, consequential or incidental damages, and (iii) any and all i mplied warranties, including warra nties of fitness for particular purpose, non-infringement and merchantability. statements regarding the suitability of products for certain type s of applications are based on vishays knowledge of typical requirements that are often placed on vishay products in generic applications. such statements are not binding statements about the suitability of products for a particular application. it is the customers responsib ility to validate that a particu lar product with the properties descri bed in the product specification is suitable fo r use in a particular application. parameters provided in datasheets and/or specification s may vary in different applications an d performance may vary over time. all operating parameters, including typical pa rameters, must be validated for each customer application by the customers technical experts. product specifications do not expand or otherwise modify vish ays terms and condit ions of purchase, including but not limited to the warranty expressed therein. except as expressly indicate d in writing, vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the vi shay product could result in personal injury or death. customers using or selling vishay products no t expressly indicated for use in such applications do so at their own risk and agr ee to fully indemnify and hold vishay and it s distributors harmless from and against an y and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale , including attorneys fees, even if such claim alleges that vis hay or its distributor was negligent regarding th e design or manufacture of the part. please contact authorized vishay personnel t o obtain written terms and conditions regardin g products designed for such applications. no license, express or implied, by estoppel or otherwise, to any intellectual prope rty rights is granted by this document or by any conduct of vishay. product names and markings noted herein may be trad emarks of their respective owners. material category policy vishay intertechnology, inc. hereby certi fies that all its products that are id entified as rohs-compliant fulfill the definitions and restrictions defined under directive 2011/65/eu of the euro pean parliament and of the council of june 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (eee) - recast, unless otherwis e specified as non-compliant. please note that some vishay documentation may still make reference to rohs directive 2002/95/ ec. we confirm that all the products identified as being compliant to directive 2002 /95/ec conform to directive 2011/65/eu.
|
